Today, I will show you how color matching for quartz stone. First of all you should make sure that all the required equipment (including electronic said, beaker, glass, etc.) clean and tidy.

1, Take 100 g quartz stone under thickness from 0.1 to 0.3 mm), placed in a beaker (beaker volume for 250 or 500 ml) or hard plastic cup, do not use the soft plastic cup.

2, Weighing toner, accurate to 0.01 g. After toner on paper weighing accurate, respectively, to join in the beaker. If formula need several different pigments, measured, according to the required quantity from more to less has to join a beaker with clean glass round rods stirring until smooth.

3, Take a glass of 10 x 250 px, puts out around a third of the toner on the glass, add 400 quartz powder, stir well, joined the resin stirring until smooth. Quartz powder collocates with resin on the base, according to the proportion of quartz sand.

4, Take a 2 * 125 px glass, take a good stir paste daub on the surface, through the glass, observe its color are consistent with the required color or not. To adjust the dosage of ingredients, modulate color stone needed until.

5, After getting the required colors to do small sample stone material experiment.

6, Do small sample experiment, stirring rate needed for actual capacity is 5 times.

After all the above process done, you will get the your nice quartz stone color.