If you choose to use quartzite countertops for cabinets, so during the installation process, we need to pay attention to the flowing tips:

1, before installing the engineered stone, you will need to inspect the site of cabinets and ground ark smoothness, check the size of the stone countertops and on-site installation required if there is no error, if error, you need to processing, finishing once more.

2, when installing stone countertops, you need to keep the distance between the stone and wall, cracks in commonly 3 to 5 mm, with the main purpose of this gap is to prevent the heat bilges cold shrink after the stone table and cabinets, to extend, after the installation is complete, you will need to play in aperture place on glass glue.

3, if you need to install the sink device, you should be first to make some local modification for platform with table gear on the surface of the water, and percussion, check whether the impending, for some tiny dangling form, we can add some glass glue in the stone at the bottom of the back for filling, for some serious uneven, you need to stop the construction, adjusting the cabinets countertops to level off.

4, for some of the l-shaped or some super-long countertops, you can use some strong glass clamp to clamp stone to squeeze the gap, the gap must be cleaned up. Here, we do not advocate for those stone grinding and metope between seams, especially some dark stone series.

5, at the bottom of the cabinets of retaining water evenly daub some toning use glass glue, water used for adhesion file, must not use marble glue connection such as colloid, in order to prevent adhesion after not too compactness of adhesive and cause cracking or breakage of stone material.

6, in site construction, as far as possible to avoid having the hole of stone material in the field, to prevent improper opening and stone crack. For missing out glass glue can be cleaned with water after ten minutes.